Not The Answer You’Re Looking For? Browse Other Questions Tagged Windows
Once you have installed any missing dependencies, you can run the flutter doctor command again to verify that you’ve set everything up correctly. If Git for Windows is already installed, make sure you can run git commands from the command prompt or PowerShell. If you don’t have a caching server locally – then download the OS installer from the Mac App Store then run the installer over lunch or when you’re done for the evening. You can also boot to recovery or internet recovery on newer Macs and reinstall. Ask Different is a question and answer site for power users of Apple hardware and software.
Unplugged the USB cable, powered down phone, back up, replugged, and still no reappearance as drive. Nothing I do now will make it show up as a drive again!! So goddamn typical of this trash. I have Pdanet+ , Foxfi, and the Foxfi key installed on my old LG 670 phone running 2.2 os.
I didn’t realize gcc-5 was a different program, as the gcc version I downoaded was version 5.x I assumed that referred to the current gcc install. I would of course upvote you if I had the ability. I didn’t say it was a USB device actually, only that I wanted to install some helpful packages/drivers from USB, if that was possible without make. I wasn’t 100% sure if lspci even checked PCI-E slots, that was a guess. Connect the mobile device (phone/tablet) to the PC using the USB cable that came with the phone and tap “Yes, I have”.
It only takes a minute to sign up. I switched the phone USB connection settings to "File Transfer", disconnected the USB cable & reconnected but no difference. When I connected the phone to my Windows 10 PC Windows would see a device attach, disconnect, attach, etc. over and over without resolution.
Select one or more system images for the Android versions you want to emulate, and select Next. An x86 or x86_64 image is recommended. Using a USB cable, plug your phone into your computer. If prompted on your device, authorize your computer to access your device. The following sections describe how to perform these tasks and finish the setup process.
It worked perfectly on my Generic RCA tablet w 4.2. Similar to the previous method, right-click the file and select Run as Administrator. Now the screen will be more or less the same as given below. You’ll be asked to select your device.
Also this driver is unsigned and thus will put Windows into Test Mode. Have you checked the USB options. The default looks like "charging" so presumably no file transfer. Swipe down the notification shade, select USB options and change to transfer. I’ve used the OP3 on both Mac and Windows fine.
- wtf i did realize i needed to copy the .wim files from the tmp folders in C to the usb drive and replace the old ones with the new ones after that it worked!
- Those wishing to get exotic could run imagex and make a wim of the installation.
- If you installed Windows 7 via a PS/2 keyboard and mouse, the OS should have access to the hardware and installing drivers should be easy.
- Hell ya it ended up working driver download for m on my custom PC.
When the following screen appears, select the connection to a computer. Make sure that the machine is powered ON before connecting the USB cable.
Always use the AXE027 USB cable in the same USB socket on your computer. Then the virtual COM port setting will always remain the same. Many PICAXE users mark the correct USB socket and cable with a coloured dot to remind them which socket to use. – I turned off the phone, drive disappeared , turned it back on, it didn’t reappear as a drive.